Home > News
High potential of fire hazards exists in laboratories, research sites, machine rooms and other places where there are a lot of devices and need to run for a long time, have a. The regular inspection of on-duty personnel cannot achieve precise prevention. However, general monitoring cameras can only detect visible risks, and cannot monitor the safety of device operation. Traditional fire protection systems such as sprinklers and smoke detectors fail to measure the temperature of specific targets. Once the system is triggered, a major fire event has already occurred, which means pre-warnings cannot be provided. In contrast, the dual-spectrum thermal imaging camera can accurately measure the temperature of the target point or area. In this way, it is possible to detect hidden dangers early and prevent them before happening, and it is also capable of alarming general intrusions, realizing the two purposes in one machine.
1. The FB2/FB4 series provide different focal lengths and the choice can be made according to the implementation area and device layout
2. The camera can be connected with a POE switch for power supply and network access
3. Unified access to monitoring cameras through switches
4. Set up temperature measurement rules in specific areas/points/lines, to achieve precise arming of key parts for fire protection
5. Set up intelligent analysis such as area entry/warning line, and configure fire and security linkage alarm video to realize the two purposes in one machine
1. Thermal imaging & visible light dual-spectrum imaging offers two purposes in one machine, guaranteeing security and fire protection at the same time
2. Thermal imaging supports multiple focal length options, with a measurement distance of less than or equal to 25m
3. Temperature measurement points/lines/areas can be set for measuring key parts
4. It supports high/low/AVG temperature limit and other temperature measurement rules.
5. It supports intelligent detection algorithms such as tripwire/regional intrusion
6. Smart analysis is supported to achieve automatic alarms, prompt detection and report
7. The camera supports POE power supply, which is convenient for deployment
8. Protocols of ONVIF and GB28181 are supported for secondary development or connection to existing platforms
The high-low temperature laboratory of an enterprise in Chengdu adopts 8 FB432 cameras to monitor the temperature of its test devices.
FB2 Series
Thermal imaging & visible light dual-spectrum imaging satisfies the all-weather and 24-hour requirements for security and fire monitoring.
Use the new generation of InfiRay 12μm uncooled infrared detector, with a resolution of 256×192 and an accurate temperature measurement of less than or equal to 4m
Thermal imaging measurement range: -20°C–+550°C; accuracy: ±2°C or ±2%
Integrated with professional temperature analysis tools and multiple linkage alarm policies, supporting fire point detection and alarm
Integrated design, outdoor ingress protection rating of IP66.
FB4 Series
Thermal imaging & visible light dual-spectrum imaging satisfies the all-weather and 24-hour requirements for security and fire monitoring.
Use InfiRay uncooled infrared detector, with a high resolution of 640×512, temperature measurement distance of less than or equal to 25m and multiple focal length options
Thermal imaging measurement range: -20°C–+550°C; accuracy: ±2°C or ±2%
Integrated with professional temperature analysis tools and multiple linkage alarm policies, supporting fire point detection and alarm.
Integrated design, outdoor ingress protection rating of IP66